Abstract
ABSTRACTPurpose: Oxygen permeability or transmissibility is a crucial parameter for contact lenses to ensure that extended wear will not induce corneal hypoxia. This work tests a new method of using the oxidation of cysteamine, an oxygen-sensitive chemical, to quantify the oxygen transmissibility of current commercial contact lenses and contact lenses loaded with vitamin E.Methods: 3D printing was used to modify eye drop bottles and quartz cuvettes to create systems that allowed insertion of a contact lens in between the cysteamine solution and air. Both systems were exposed to atmospheric conditions where the only path of entry for oxygen was through the contact lens. The entering oxygen reacted with cysteamine, and the rate of cysteamine oxidation was measured using UV-vis spectrophotometry. The rate was then stoichiometrically related to oxygen transmissibility.Results: The eye drop method predicted transmissibility values within 9% of established, commercial values. The cuvette method predicted values within 10% of established values for silicone hydrogel lenses without any correction factor and within 11% for poly-hydroxyethyl-methacrylate lenses after correcting for oxygen entering the system. Incorporation of 20% (w/w) vitamin E into Acuvue® Oasys® lenses did not have a significant impact on the oxygen transmissibility.Conclusions: Both methods presented in this work can reliably measure oxygen transmissibility of contacts lenses or other materials. Further improvements in manufacturing could lead to improved accuracy and reliability, allowing wider use of this method for quantifying the oxygen transport in contact lenses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.