Abstract
Gafchromic external beam therapy 3 (EBT3) film has widely been used in medical field applications. Principally, the EBT3 film’s color gradually changes from light green to darker color under incremental exposures by ionizing or even non-ionizing ultraviolet (UV) radiation. Peak absorbance of the EBT3 film can be used to predict absorbed doses by the film. However, until today, related researches still rely on spectrometers for color analysis of EBT3 films. Hence, this paper presents a comparative analysis between results produced by the spectrometer and a much simpler light-emitting diode-photodiode based system in profiling the color changes of EBT3 films after exposure by solar UV radiation. This work has been conducted on a set of 50 EBT3 samples with incremental solar UV exposure (doses). The wavelength in the red region has the best sensitivity in profiling the color changes of EBT3 films for low solar UV exposure measurement. This study foresees the ability of blue wavelength to profile films with a large range of solar UV exposure. The LED (light emitting diode)-based optical system has produced comparable measurement accuracies to the spectrometer and thus, with a potential for replacing the need for a multipurpose spectroscopy system for simple measurement of light attenuation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
