Spectroscopic gamma camera for use in high dose environments

Abstract

We developed a pinhole gamma camera to measure distributions of radioactive material contaminants and to identify radionuclides in extraordinarily high dose regions (1000mSv/h). The developed gamma camera is characterized by: (1) tolerance for high dose rate environments; (2) high spatial and spectral resolution for identifying unknown contaminating sources; and (3) good usability for being carried on a robot and remotely controlled. These are achieved by using a compact pixelated detector module with CdTe semiconductors, efficient shielding, and a fine resolution pinhole collimator. The gamma camera weighs less than 100kg, and its field of view is an 8m square in the case of a distance of 10m and its image is divided into 256 (16×16) pixels. From the laboratory test, we found the energy resolution at the 662keV photopeak was 2.3% FWHM, which is enough to identify the radionuclides. We found that the count rate per background dose rate was 220cpsh/mSv and the maximum count rate was 300kcps, so the maximum dose rate of the environment where the gamma camera can be operated was calculated as 1400mSv/h. We investigated the reactor building of Unit 1 at the Fukushima Dai-ichi Nuclear Power Plant using the gamma camera and could identify the unknown contaminating source in the dose rate environment that was as high as 659mSv/h.