Abstract

Calcium in water was determined by a spectrophotometric method involving flow injection coupled with solvent extraction. An ion association complex which formed between a calcium-crown complex ion and a dye anion was extracted into an organic solvent and the absorbance of the organic phase was measured after phase separation. Six derivatives of alkylaminophenylazobenzene sulfonic acid and tetrabromophenolphthalein ethylester were examined as counter anions with dicyclohexano-24-crown-8, and a mixture of benzene and chlorobenzene was examined as an extraction solvent. A suitable method for calcium determination in water was one with Propyl Orange and a (1+1 v/v) mixture of benzene and chlorobenzene. The carrier stream was distilled water, while the reagent stream was comprised of a dye anion and lithium hydroxide. The sampling rate was 20–30 per hour. The calibration graph was linear at concentrations up to 10~4 M using samples of 100 μl. The detection limit corresponding to a signal-to-noise ratio of 3 was 2×10-7 M; the relative standard deviation was 0.99% for 10 injections of 5×10-5 M calcium solution. Calcium in river water was determined satisfactorily by the proposed method.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.