Abstract

A sensitive and accurate spectrophotometric method is described for the determination of phosphate in natural water using Rhodamine B. The ion pair of molybdophosphate with Rhodamine B is floated at the phase boundary between an ethyl ether phase and an aqueous phase: the aqueous phase comprises 1.0 mol dm-3 nitric acid, 33 mmol dm-3 sodium molybdate and 20 μmol dm-3 Rhodamine B. The small amount of excess Rhodamine B extracted into ethyl ether is removed by washing the organic phase with 25 cm3 water. The floated ion pair is dissolved by adding methanol into the ethyl ether phase after discarding the aqueous phase. The calibration curve for phosphate is linear up to 1.0 μg of phosphorus with the correlation coefficient of 0.999. The apparent molar absorptivity of phosphate was 4.1×105 dm3 mol-1 cm-1 at 555 nm; the relative standard deviation was 2.0% for 1.0 μg of phosphorus (10 determinations). Arsenate causes positive error, while no ions commonly existing in natural water, except large amounts of silicate ions, interfere with the determination of phosphate. The proposed method was applied to the determination of phosphate-phosphorus in some samples of natural water; satisfactory results were obtained.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.