Spectral Segmentation Multi-Scale Feature Extraction Residual Networks for Hyperspectral Image Classification

In the field of hyperspectral image (HSI) classification in remote sensing, the combination of spectral and spatial features has gained considerable attention. In addition, the multiscale feature extraction approach is very effective at improving the classification accuracy for HSIs, capable of capturing a large amount of intrinsic information. However, some existing methods for extracting spectral and spatial features can only generate low-level features and consider limited scales, leading to low classification results, and dense-connection based methods enhance the feature propagation at the cost of high model complexity. This paper presents a two-branch multiscale spectral-spatial feature extraction network (TBMSSN) for HSI classification. We design the multiscale spectral feature extraction (MSEFE) and multiscale spatial feature extraction (MSAFE) modules to improve the feature representation, and a spatial attention mechanism is applied in the MSAFE module to reduce redundant information and enhance the representation of spatial features at multiscale. Then we densely connect series of MSEFE or MSAFE modules respectively in a two-branch framework to balance efficiency and effectiveness, alleviate the vanishing-gradient problem and strengthen the feature propagation. To evaluate the effectiveness of the proposed method, the experimental results were carried out on bench mark HSI datasets, demonstrating that TBMSSN obtained higher classification accuracy compared with several state-of-the-art methods.

Hyperspectral image (HSI) classification is a crucial technique that assigns each pixel in an image to a specific land cover category by leveraging both spectral and spatial information. In recent years, HSI classification methods based on convolutional neural networks (CNNs) and Transformers have significantly improved performance due to their strong feature extraction capabilities. However, these improvements often come with increased model complexity, leading to higher computational costs. To address this, we propose a compact and efficient spectral-spatial feature extraction and attention-based neural network (SSFAN) for HSI classification. The SSFAN model consists of three core modules: the Parallel Spectral-Spatial Feature Extraction Block (PSSB), the Scan Block, and the Squeeze-and-Excitation MLP Block (SEMB). After preprocessing the HSI data, it is fed into the PSSB module, which contains two parallel streams, each comprising a 3D convolutional layer and a 2D convolutional layer. The 3D convolutional layer extracts spectral and spatial features from the input hyperspectral data, while the 2D convolutional layer further enhances the spatial feature representation. Next, the Scan Block module employs a layered scanning strategy to extract spatial information at different scales from the central pixel outward, enabling the model to capture both local and global spatial relationships. The SEMB module combines the Spectral-Spatial Recurrent Block (SSRB) and the MLP Block. The SSRB, with its adaptive weight assignment mechanism in the SToken Module, flexibly handles time steps and feature dimensions, performing deep spectral and spatial feature extraction through multiple state updates. Finally, the MLP Block processes the input features through a series of linear transformations, GELU activation functions, and Dropout layers, capturing complex patterns and relationships within the data, and concludes with an argmax layer for classification. Experimental results show that the proposed SSFAN model delivers superior classification performance, outperforming the second-best method by 1.72%, 5.19%, and 1.94% in OA, AA, and Kappa coefficient, respectively, on the Indian Pines dataset. Additionally, it requires less training and testing time compared to other state-of-the-art deep learning methods.

Recently, deep learning methods based on three-dimensional (3-D) convolution have been widely used in the hyperspectral image (HSI) classification tasks and shown good classification performance. However, affected by the irregular distribution of various classes in HSI datasets, most previous 3-D convolutional neural network (CNN)-based models require more training samples to obtain better classification accuracies. In addition, as the network deepens, which leads to the spatial resolution of feature maps gradually decreasing, much useful information may be lost during the training process. Therefore, how to ensure efficient network training is key to the HSI classification tasks. To address the issue mentioned above, in this paper, we proposed a 3-DCNN-based residual group channel and space attention network (RGCSA) for HSI classification. Firstly, the proposed bottom-up top-down attention structure with the residual connection can improve network training efficiency by optimizing channel-wise and spatial-wise features throughout the whole training process. Secondly, the proposed residual group channel-wise attention module can reduce the possibility of losing useful information, and the novel spatial-wise attention module can extract context information to strengthen the spatial features. Furthermore, our proposed RGCSA network only needs few training samples to achieve higher classification accuracies than previous 3-D-CNN-based networks. The experimental results on three commonly used HSI datasets demonstrate the superiority of our proposed network based on the attention mechanism and the effectiveness of the proposed channel-wise and spatial-wise attention modules for HSI classification. The code and configurations are released at Github.com.

In the last five years, deep learning has been introduced to tackle the hyperspectral image (HSI) classification and demonstrated good performance. In particular, the convolutional neural network (CNN)-based methods for HSI classification have made great progress. However, due to the high dimensionality of HSI and equal treatment of all bands, the performance of these methods is hampered by learning features from useless bands for classification. Moreover, for patchwise-based CNN models, equal treatment of spatial information from the pixel-centered neighborhood also hinders the performance of these methods. In this article, we propose an end-to-end residual spectral-spatial attention network (RSSAN) for HSI classification. The RSSAN takes raw 3-D cubes as input data without additional feature engineering. First, a spectral attention module is designed for spectral band selection from raw input data by emphasizing useful bands for classification and suppressing useless bands. Then, a spatial attention module is designed for the adaptive selection of spatial information by emphasizing pixels from the same class as the center pixel or those are useful for classification in the pixel-centered neighborhood and suppressing those from a different class or useless. Second, two attention modules are also used in the following CNN for adaptive feature refinement in spectral-spatial feature learning. Third, a sequential spectral-spatial attention module is embedded into a residual block to avoid overfitting and accelerate the training of the proposed model. Experimental studies demonstrate that the RSSAN achieved superior classification accuracy compared with the state of the art on three HSI data sets: Indian Pines (IN), University of Pavia (UP), and Kennedy Space Center (KSC).

Recently, graph convolutional network (GCN) has drawn increasing attention in hyperspectral image (HSI) classification, as it can process arbitrary non-Euclidean data. However, dynamic GCN that refines the graph heavily relies on the graph embedding in the previous layer, which will result in performance degradation when the embedding contains noise. In this letter, we propose a novel dual residual graph convolutional network (DRGCN) for HSI classification that integrates two adjacency matrices of dual GCN. In detail, one GCN applies a soft adjacency matrix to extract spatial features, the other utilizes the dynamic adjacency matrix to extract global context-aware features. Subsequently, the features extracted by dual GCN are fused to make full use of the complementary and correlated information among two graph representations. Moreover, we introduce residual learning to optimize graph convolutional layers during the training process, to alleviate the over-smoothing problem. The advantage of dual GCN is that it can extract robust and discriminative features from HSI. Extensive experiments on four HSI data sets, including Indian Pines, Pavia University, Salinas, and Houston University, demonstrate the effectiveness and superiority of our proposed DRGCN, even with small-sized training data.

Convolutional neural networks (CNNs) have achieved great results in hyperspectral image (HSI) classification in recent years. However, convolution kernels are reused among different spatial locations, known as spatial-agnostic or weight-sharing kernels. Furthermore, the preference of spatial compactness in convolution (typically, 3×3 kernel size) constrains the receptive field and the ability to capture long-range spatial interactions. To mitigate the above two issues, in this article, we combine a novel operation called involution with residual learning and develop a new deep residual involution network (DRIN) for HSI classification. The proposed DRIN could model long-range spatial interactions well by adopting enlarged involution kernels and realize feature learning in a fairly lightweight manner. Moreover, the vast and dynamic involution kernels are distinct over different spatial positions, which could prioritize the informative visual patterns in the spatial domain according to the spectral information of the target pixel. The proposed DRIN achieves better classification results when compared with both traditional machine learning-based and convolution-based methods on four HSI datasets. Especially in comparison with the convolutional baseline model, i.e., deep residual network (DRN), our involution-powered DRIN model increases the overall classification accuracy by 0.5%, 1.3%, 0.4%, and 2.3% on the University of Pavia, the University of Houston, the Salinas Valley, and the recently released HyRANK HSI benchmark datasets, respectively, demonstrating the potential of involution for HSI classification.

Extracting spatial and spectral features through deep neural networks has become an effective means of classification of hyperspectral images. However, most networks rarely consider the extraction of multi-scale spatial features and cannot fully integrate spatial and spectral features. In order to solve these problems, this paper proposes a multi-scale and multi-level spectral-spatial feature fusion network (MSSN) for hyperspectral image classification. The network uses the original 3D cube as input data and does not need to use feature engineering. In the MSSN, using different scale neighborhood blocks as the input of the network, the spectral-spatial features of different scales can be effectively extracted. The proposed 3D–2D alternating residual block combines the spectral features extracted by the three-dimensional convolutional neural network (3D-CNN) with the spatial features extracted by the two-dimensional convolutional neural network (2D-CNN). It not only achieves the fusion of spectral features and spatial features but also achieves the fusion of high-level features and low-level features. Experimental results on four hyperspectral datasets show that this method is superior to several state-of-the-art classification methods for hyperspectral images.

In recent years, hyperspectral image (HSI) classification based on generative adversarial networks (GAN) has achieved great progress. GAN-based classification methods can mitigate the limited training sample dilemma to some extent. However, several studies have pointed out that existing GAN-based HSI classification methods are heavily affected by the imbalanced training data problem. The discriminator in GAN always contradicts itself and tries to associate fake labels to the minority-class samples, and thus impair the classification performance. Another critical issue is the mode collapse in GAN-based methods. The generator is only capable of producing samples within a narrow scope of the data space, which severely hinders the advancement of GAN-based HSI classification methods. In this paper, we proposed an Adaptive DropBlock-enhanced Generative Adversarial Networks (ADGAN) for HSI classification. First, to solve the imbalanced training data problem, we adjust the discriminator to be a single classifier, and it will not contradict itself. Second, an adaptive DropBlock (AdapDrop) is proposed as a regularization method employed in the generator and discriminator to alleviate the mode collapse issue. The AdapDrop generated drop masks with adaptive shapes instead of a fixed size region, and it alleviates the limitations of DropBlock in dealing with ground objects with various shapes. Experimental results on three HSI datasets demonstrated that the proposed ADGAN achieved superior performance over state-of-the-art GAN-based methods. Our codes are available at https://github.com/summitgao/HC_ADGAN

Convolutional neural networks (CNNs) for hyperspectral image (HSI) classification have generated good progress. Meanwhile, graph convolutional networks (GCNs) have also attracted considerable attention by using unlabeled data, broadly and explicitly exploiting correlations between adjacent parcels. However, the CNN with a fixed square convolution kernel is not flexible enough to deal with irregular patterns, while the GCN using the superpixel to reduce the number of nodes will lose the pixel-level features, and the features from the two networks are always partial. In this paper, to make good use of the advantages of CNN and GCN, we propose a novel multiple feature fusion model termed attention multi-hop graph and multi-scale convolutional fusion network (AMGCFN), which includes two sub-networks of multi-scale fully CNN and multi-hop GCN to extract the multi-level information of HSI. Specifically, the multi-scale fully CNN aims to comprehensively capture pixel-level features with different kernel sizes, and a multi-head attention fusion module is used to fuse the multi-scale pixel-level features. The multi-hop GCN systematically aggregates the multi-hop contextual information by applying multi-hop graphs on different layers to transform the relationships between nodes, and a multi-head attention fusion module is adopted to combine the multi-hop features. Finally, we design a cross attention fusion module to adaptively fuse the features of two sub-networks. AMGCFN makes full use of multi-scale convolution and multi-hop graph features, which is conducive to the learning of multi-level contextual semantic features. Experimental results on three benchmark HSI datasets show that AMGCFN has better performance than a few state-of-the-art methods.

Traditional hyperspectral image (HSI) classification methods mainly include machine learning and convolutional neural network. However, they extremely depend on the large training samples. To obtain high accuracy on limited training samples, we propose a novel end-to-end spectral-spatial multi-scale network (SSMSN) for HSI classification. The SSMSN uses the multi-scale spectral module and the multi-scale spatial module to extract discriminative multi-scale spectral and multi-scale spatial features separately. In the multi-scale spectral module and spatial module, the multi-scale Res2Net block structure can learn multi-scale features at a granular level and increase the range of receptive fields by constructing the hierarchical residual-like connection within one single residual block. To alleviate the overfitting problem and further improve the classification accuracy on limited training samples, we adopt a simple but effective hinge cross-entropy loss function to train the SSMSN at the dynamic learning rate. A large number of experimental results demonstrate that on the Indiana Pines, University of Pavia, Kennedy Space Center, and Salinas Scene data sets, the proposed SSMSN achieves higher classification accuracy than state-of-the-art methods on limited training samples. Meanwhile, our SSMSN obtains less training and testing time than the popular AUSSC method.

Convolutional Neural Network (CNN) has developed hyperspectral image (HSI) classification effectively. Although many CNN-based models can extract local features in HSI, it is difficult for them to extract global features. With its ability to capture long-range dependencies, Transformer is gradually gaining prominence in HSI classification, but it may overlook some local details when extracting features. To address these issues, we proposed a CNN and transformer interaction network (CTIN) for HSI classification. Firstly, A dual-branch structure was constructed in which CNN and Transformer are arranged in parallel to simultaneously extract global features and local features in HSI. Secondly, a feature interaction module has been imported between the two branches, thus facilitating a bi-directional flow of information between the global and local feature spaces. In this way, the network structure combines the advantages of CNN and Transformer in extracting features as much as possible. In addition, a token generation method is designed to harness abundant contextual information that is relevant to the centre pixel, and improve the accuracy of the final classification. Experiments were conducted on four hyperspectral datasets (two classical datasets – Indian Pines, Salinas Valley, a new satellite dataset – Yellow River, and an self-made UAV dataset-Yellow River Willow). Experimental results show that the proposed method outperforms the other state-of-the-art methods, with overall accuracies of 99.21%, 99.61%, 92.40%, and 98.17%, respectively.

Recently, deep learning has been successfully and widely used in hyperspectral image (HSI) classification. Considering the difficulty of acquiring HSIs, there are usually a small number of pixels used as the training instances. Therefore, it is hard to fully use the advantages of deep learning networks; for example, the very deep layers with a large number of parameters lead to overfitting. This paper proposed a dynamic wide and deep neural network (DWDNN) for HSI classification, which includes multiple efficient wide sliding window and subsampling (EWSWS) networks and can grow dynamically according to the complexity of the problems. The EWSWS network in the DWDNN was designed both in the wide and deep direction with transform kernels as hidden units. These multiple layers of kernels can extract features from the low to high level, and because they are extended in the wide direction, they can learn features more steadily and smoothly. The sliding windows with the stride and subsampling were designed to reduce the dimension of the features for each layer; therefore, the computational load was reduced. Finally, all the weights were only from the fully connected layer, and the iterative least squares method was used to compute them easily. The proposed DWDNN was tested with several HSI data including the Botswana, Pavia University, and Salinas remote sensing datasets with different numbers of instances (from small to big). The experimental results showed that the proposed method had the highest test accuracies compared to both the typical machine learning methods such as support vector machine (SVM), multilayer perceptron (MLP), radial basis function (RBF), and the recently proposed deep learning methods including the 2D convolutional neural network (CNN) and the 3D CNN designed for HSI classification.

Considering that the hyperspectral image (HSI) has a large number of spectrum bands, to optimize the features and make full use of more informative features, many papers have introduced attention mechanism to the models based on three-dimensional (3D) convolution. However, though the number of spectrum bands is large, there are many useless bands and noise, which may generate lots of useless features into the subsequent network and affect the learning efficiency of each convolutional layer. Therefore, how to reduce the influence of noise from HSI data itself and the classification process is key to the HSI classification tasks. In this paper, we proposed a 3D convolutional neural network (3D-CNN) based two-stage attention network (TSAN) for HSI classification. For one thing, the spectral-wise attention module in the first stage can optimize the whole spectrum by shielding useless spectrum bands and reducing the noise in the spectrum. For another, more discriminative spectral–spatial features are extracted and sent to the subsequent layers by channel-wise attention mechanism combined with soft thresholding in the second stage. In addition, we introduced non-local block to learn global spatial features and used a multi-scale network to combine the local space and the global space. The experiments carried out on three HSI datasets show that our proposed network for HSI classification tasks can indeed reduce the noise by soft thresholding and achieve promising classification performance.

Graph convolutional networks (GCNs) are a promising approach for addressing the necessity for long-range information in hyperspectral image (HSI) classification. Researchers have attempted to develop classification methods that combine strong generalizations with effective classification. However, the current HSI classification methods based on GCN present two main challenges. First, they overlook the multi-view features inherent in HSIs, whereas multi-view information interacts with each other to facilitate classification tasks. Second, many algorithms perform a rudimentary fusion of extracted features, which can result in information redundancy and conflicts. To address these challenges and exploit the strengths of multiple features, this paper introduces an adaptive multi-feature fusion GCN (AMF-GCN) for HSI classification. Initially, the AMF-GCN algorithm extracts spectral and textural features from the HSIs and combines them to create fusion features. Subsequently, these three features are employed to construct separate images, which are then processed individually using multi-branch GCNs. The AMG-GCN aggregates node information and utilizes an attention-based feature fusion method to selectively incorporate valuable features. We evaluated the model on three widely used HSI datasets, i.e., Pavia University, Salinas, and Houston-2013, and achieved accuracies of 97.45%, 98.03%, and 93.02%, respectively. Extensive experimental results show that the classification performance of the AMF-GCN on benchmark HSI datasets is comparable to those of state-of-the-art methods.

Dual selective fusion transformer network for hyperspectral image classification.