Specimens size, aggregate size, and aggregate type effect on spalling of concrete in fire

Abstract

SummaryThis paper attempted to isolate variables that govern concrete spalling when exposed to a hydrocarbon fire. The influence of specimen size was investigated by studying 4 specimen sizes consisting of cylinders, columns, and panels. Three aggregate sizes, 7 mm, 14 mm, and 20 mm were used in the concrete mixes to determine their effect on concrete spalling. Influence of aggregate type on concrete spalling was also investigated. Forty‐two different specimens were considered in this investigation. Concrete spalling was quantified as nominal spalling depth, which has been presented as a new way of quantifying the degree of concrete spalling. The results indicated that specimen size did have an effect on the spalling of concrete under hydrocarbon fire exposure and that nominal spalling depth of concrete increases as the specimen size increases. Aggregate size effect was evident when the maximum aggregate size increased from 7 mm to 20 mm, and explosive spalling was more severe for specimens with small size aggregates. Specimens with 14‐mm aggregate size showed inconsistent results and the spalling behavior witnessed was more random and sporadic. The type of aggregate used has no clear bearing on concrete spalling given both aggregates had similar linear expansion profiles.