Specification of the acoustical input to the ear at high frequencies.

Abstract

The sound fields that arise in the auditory canals of cats have been examined both experimentally and theoretically. Of particular interest was the spatial variation of sound pressure near the eardrum, where reference probes are typically located. Using a computer controlled data acquisition system, sound pressure was measured between 100 Hz and 33 kHz for constant driver input at 14 different locations in the ear canal of a cat, and the standing wave patterns formed. The shape of the patterns could be predicted quite well above 12 kHz using a theory that requires specification of only the geometry of the ear canal. This theory, an extension of the one-dimensional horn equation, applies to three-dimensional, rigid-walled tubes that have both variable cross section and curvature along their lengths. Large variations of sound pressure along the ear canal and over the surface of the eardrum are found above about 10 kHz. As a consequence it is not possible to define the acoustical input to the ear from sound pressure level measured at any single location. Even in comparative experiments, in which only the constancy of the acoustical input is important, any uncertainty in reference probe location would lead to an uncertainty in sound pressure level when different sets of measurements are compared. This error, calculated for various probe locations and frequencies, is especially large when the probe is near a minimum of the sound field. Spatial variations in pressure can also introduce anomalous features into the measured frequency response of other auditory quantities when eardrum sound pressure is used as a reference. This is illustrated with measurements of the round window cochlear microphonic.