Specific Heat Capacity of Solar Salt-Based Nanofluids: Molecular Dynamics Simulation and Experiment.

Abstract

In this study, a nanofluid composed of molten solar salt (MSS) and 1.0% SiO2 nanoparticles by mass was created and analyzed using differential scanning calorimetry (DSC) to determine its specific heat capacity (SHC). The SHC of the nanofluid was found to be significantly higher than that of pure MSS. The average increase in SHC of the nanofluid with 1.0% SiO2 nanoparticles (NPs) loading was found to be 15.65% compared with pure MSS. The formation of nanostructures after doping with NPs may increase the SHC of molten salt (MS) nanofluids, according to certain published research that included experimental confirmation. Nevertheless, no thorough theoretical or computational studies have been conducted to verify the experimental findings related to MSS nanofluid. Molecular dynamics (MD) simulations were conducted in various simulation boxes for different cases to verify the experimental findings and investigate the mechanism behind the enhancement of SHC caused by the addition of SiO2 NPs in eutectic MSS. The simulations used pure MSS and mixtures containing NaNO3 nanostructures bonded with SiO2 NPs. The highest SHC increase of 25.03% was observed when the simulation box contained 13.71% NaNO3 nanostructures by weight. The incorporation of NaNO3 nanostructures increased the surface area and total surface energy, leading to a positive effect on the SHC of the MSS nanofluid. However, the decrease in the base molten salt's SHC had a slight negative impact on the overall SHC of the MS nanofluid.