Speciation of Dissolved Inorganic Arsenic by Diffusive Gradients in Thin Films: Selective Binding of AsIII by 3-Mercaptopropyl-Functionalized Silica Gel

Abstract

A diffusive gradients in thin films (DGT) technique for selectively measuring As(III) utilizes commercially available 3-mercaptopropyl-functionalized silica gel. Deployment of the new technique alongside the Metsorb-DGT for total inorganic arsenic allows the calculation of As(III) directly and As(V) by difference. Uptake of As(III) by mercapto-silica was quantitative and elution with a mixture of 1 mol L(-1) HNO(3) and 0.01 mol L(-1) KIO(3) gave a recovery of 85.6 ± 1.7%. DGT validation experiments showed linear accumulation of As(III) over time (R(2) > 0.998). Accumulation was unaffected by varying ionic strength (0.0001-0.75 mol L(-1) NaNO(3)) and pH (3.5-8.5). Deployment of mercapto-silica DGT and Metsorb DGT in seawater spiked with As(III) and As(V) demonstrated the ability of the combined approach to accurately quantify both species in the presence of potential competing ions. Ferrihydrite DGT, which has been previously reported for the measurement of total inorganic arsenic, was evaluated in seawater and shown to underestimate both As(III) and As(V) at longer deployment times (72 h). Reproducibility of the new mercapto-silica DGT technique was good (relative standard deviations < 9%), and the average method detection limit was sufficiently low to allow quantification of ultratrace concentrations of As(III) (0.03 μg L(-1); 72 h deployment).