Spatio-seasonal variation of airborne asbestos concentration in urban areas of Shiraz, Iran.

Abstract

Background Asbestos fiber is mainly released from friction product in brakes and clutch linings and from reinforcing agent in the asbestos-cement industry. It leads to serious health problem such as mesothelioma and lung cancer. The objectives of this study were to monitor the levels of asbestos fibers in ambient air of Shiraz, Iran during 2014, and to draw its GIS distribution map for the city. Methods Samples were collected by mixed cellulose ester filters mounted on an open-faced filter holder using a SKC sampling pump. Fiber counting was conducted using both phase contrast microscopy (PCM) method to determine total fibers, and scanning electron microscopy (SEM) method to identify non-asbestos from asbestos fibers. Results The average concentrations of asbestos fibers in ambient air of the city were 1.11±0.25 PCM f/l and 12.21±2.52 SEM f/l. The highest concentration of asbestos fibers was measured in Valiasr square amounting 1.96±0.34 PCM f/l and 16.87 ±2.14 SEM f/l. Conclusions The average of asbestos fibers in all sampling points was higher than the WHO guideline (0.05 PCM f/l, 2.2 SEM f/l). This may be attributed to the frequently occurrence of heavy traffic, the existence of relevant industries in and around the city, and the topographic characteristics of the city. Thus, product substitution, traffic smoothing and industrial sites relocating are suggested to eliminate the asbestos fibers emission.