Abstract
Gigahertz hard X-ray imaging presents an unprecedented challenge to both timing and spatial resolutions for inorganic scintillator-based front imagers. A beam test with 30-keV X-rays from the Advanced Photon Source (APS) showed that 5-mm BaF2 plates resolve well 30-keV X-ray septuplets of 27-ps width and 2.83-ns spacing. Pixelated crystal screens with a pitch down to $400~\mu \text{m}$ were fabricated by mechanic slicing for BaF2, BaF2:Y, and LYSO crystals. Their spatial resolution and detection efficiency for hard X-rays are defined by the pitch and thickness, respectively. Thicker monolithic crystal screens show poorer spatial resolution, which may be improved using a small optical aperture with a loss in both efficiency and dynamic range for hard X-rays. Future plans include pursuing smaller crystal pitches by laser slicing and research and development on novel ultrafast inorganic scintillators.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.