Abstract
The low-pressure hot-deformation methodology was applied to reprocess the nanocrystalline hydrogenation–disproportionation–desorption–recombination (HDDR) Nd-Fe-B powders from end-of-life (EOL) permanent magnets’ waste to determine the mechanism of texture development and the resultant improvement in remanence (and BHmax) in the recycled material. Both the hot-pressed and hot-deformed magnets produced via spark plasma sintering (SPS) were compared in terms of their magnetic properties with respect to forging pressures. Also, a comparison was established with the microstructure to cite the effectiveness of texture development at low deformation rates and pressures which is pivotal for retaining high coercivity. The hot-pressed magnets maintain the high coercivity (better than 100%) of the original recycled powder due to the control of SPS conditions. The hot deformation pressure was varied from 100–150 MPa at 750 °C processing temperature to identify the optimal texture development in the sintered HDDR Nd-Fe-B magnets. The effect of post-hot-deformation thermal treatment was also investigated, which helped in boosting the overall magnetic properties and better than the recycled feedstock. This low-pressure hot deformation process improved the remanence of the hot-pressed magnet by 11% over the starting recycled powder. The Mr/MS ratio which was 0.5 for the hot-pressed magnets increased to 0.64 for the magnets hot-deformed at 150 MPa. Also, a 55% reduction in height of the sample was achieved with the c-axis texture, indicating approximately 23% higher remanence over the isotropic hot-pressed magnets. After hot deformation, the intrinsic coercivity (HCi) of 960 kA/m and the remanence (Br) value of 1.01 T at 150 MPa is indicative that the controlled SPS reprocessing technique can prevent microstructure related losses in the magnetic properties of the recycled materials. This route also suggests that the scrap Nd-Fe-B magnets can be treated with recoverable magnetic properties subsequently via HDDR technique and controlled hot deformation with a follow-up annealing.
Highlights
The rare-earth based Nd-Fe-B permanent magnets (REPMs) are vital components for modern electronics, energy, medical imaging, and automotive industries due to their high magnetization and magnetostatic energy confined in a small volume (BHmax )
We proposed a model to define the mechanism behind the improvement in the magnetic properties after the thermal treatment
The Vibrating Sample Magnetometer (VSM) measurements on the EOL scrap batches processed by HDDR method are shown in Figure 1, indicate the reprocessed batches are quite similar in polarization (J) vs. applied field (H) response, which indicates good consistency of results and Metals 2020, 10, x FOR PEER REVIEW
Summary
The rare-earth based Nd-Fe-B permanent magnets (REPMs) are vital components for modern electronics, energy, medical imaging, and automotive industries due to their high magnetization and magnetostatic energy confined in a small volume (BHmax ) Nanocrystalline Nd-Fe-B alloys cannot be conventionally sintered which eludes their high coercivity exploitation because the ultrafine grain structure will undergo excessive grain coarsening at elevated sintering temperatures, resulting into coercivity losses. Due to this reason, either the bonded magnets are their primary application [5] or the rapid processing methodologies are applied, e.g., spark plasma sintering, hot deformation, and die-upsetting [1,6,7]. In order to enhance the remanence and the energy product, the hot deformation methodology is necessary [9]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.