Abstract
In the LHC Run 3, starting in 2021, the upgraded Time Projection Chamber (TPC) of the ALICE experiment will record minimum bias Pb–Pb collisions in a continuous readout mode at an interaction rate up to 50 kHz. This corresponds to typically 4-5 overlapping collisions during the electron drift time in the detector. Despite careful tuning of the new quadruple GEM-based readout chambers, which fulfill the design requirement of an ion backflow below 1%, these conditions will lead to space-charge distortions of several centimeters that fluctuate in time. They will be corrected via a calibration procedure that uses the information of the Inner Tracking System (ITS), which is located inside, and the Transition Radiation Detector (TRD) and Time-Of-Flight system (TOF), located around the TPC, respectively. By using such a procedure the intrinsic track resolution of the TPC of a few hundred micrometers can be restored. The required online tracking algorithm for the TRD, which is based on a Kalman filter, is presented. The procedure matches extrapolated ITS-TPC tracks to TRD space-points utilizing GPUs. Subsequently these global tracks are refitted neglecting the TPC information. The residuals of the TPC clusters to the interpolation of the refitted tracks are used to create a map of spacecharge distortions. Regular updates of the map compensate for changes in the TPC conditions. The map is applied in the final reconstruction of the data. First performance results of the tracking algorithm will be shown.
Highlights
A Large Ion Collider Experiment (ALICE) [1] is a dedicated heavy-ion experiment at the Large Hadron Collider (LHC) at CERN, designed to study the physics of strongly interacting matter at extreme energy densities and temperatures
It consists of the following steps: 1. Track seeding and following in the Time Projection Chamber (TPC) is done with relaxed tolerances
PT ≈ 1.5 GeV/c the efficiency for the new Transition Radiation Detector (TRD) tracking algorithm deteriorates compared to the old tracking, which is based on cluster data
Summary
A Large Ion Collider Experiment (ALICE) [1] is a dedicated heavy-ion experiment at the Large Hadron Collider (LHC) at CERN, designed to study the physics of strongly interacting matter at extreme energy densities and temperatures. During the second LHC data taking period between 2015 and 2018 (commonly denoted as Run 2) the main tracking detector inside the central barrel, the TPC, was affected by large local distortions induced by space charge [2]. While the space-charge distortions were small in the bulk of the detector and O(cm) only in localized regions, they still need to be corrected for in order to preserve the full detector performance. The MWPC-based readout chambers will be replaced by.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
