Abstract
AbstractA study was conducted to determine the accuracy and precision of phospholipid analysis by a simple Fourier transform infrared spectroscopy (FTIR) method relative to the conventional phospholipid phosphorus analysis by the acid digest/arseno‐molybdate method by Bartlett. Commercial soy lecithins of known concentrations of phospholipid were prepared and the phospholipid content measured by the FTIR and Bartlett methods. The coefficients of determination and of variances using the two methods were determined. The coefficient of determination for the FTIR method was >0.976 while that for the Bartlett method was ∼0.821. The coefficients of variances (CV) for 1–20% phospholipid concentration range using 10 replicate samples were found to lie between 3.59 and 9.45% for the FTIR method, while the Bartlett method had much higher CV for the same range and replicates (8.95 to 48.73%), signifying the higher accuracy and precision of the FTIR compared to the Bartlett method in the determination of the actual percentage of phospholipid. The Bartlett method gave no significant difference in the phospholipid levels at smaller concentrations, indicating its limitation in accurately determining percentage phospholipid of samples at low concentrations. The one‐way analysis of variance at the 1–20% phospholipid concentration range showed that there were significant differences in the mean percentage phospholipid levels for the FTIR data, which was therefore able to distinguish samples with small differences in phospholipid levels. The FTIR method gave consistently reliable results within the range chosen (1–20% phospholipid content). FTIR is a fast, simple, and reliable analytical tool for quantitative phospholipid analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.