Abstract
Bio-char by-products from fast wood/bark pyrolyses, were investigated as adsorbents for the removal of the toxic metals (As 3+, Cd 2+, Pb 2+) from water. Oak bark, pine bark, oak wood, and pine wood chars were obtained from fast pyrolysis at 400 and 450 °C in an auger-fed reactor and characterized. A commercial activated carbon was also investigated for comparison. Chars were sieved (>600, 600–250, 250–177, 177–149, and <149 μm) and the particle size fraction from 600 to 250 μm was used without further modification for all studies unless otherwise stated. Sorption studies were performed at different temperatures, pHs, and solid to liquid ratios in the batch mode. Maximum adsorption occurred over a pH range 3–4 for arsenic and 4–5 for lead and cadmium. Kinetic studies yielded an optimum equilibrium time of 24 h with an adsorbent dose of 10 g/L and concentration ∼100 mg/L for lead and cadmium. Sorption isotherms studies were conducted in broad concentration ranges (1–1000 ppb for arsenic, 1 × 10 −5 – 5 × 10 −3 M for lead and cadmium). Oak bark out-performed the other chars and nearly mimicked Calgon F-400 adsorption for lead and cadmium. In an aqueous lead solution with initial concentration of 4.8 × 10 −4 M , both oak bark and Calgon F-400 (10 g/L) removed nearly 100% of the heavy metal. Oak bark (10 g/L) also removed about 70% of arsenic and 50% of cadmium from aqueous solutions. Varying temperatures (e.g., 5, 25, and 40 °C) were used to determine the effect of temperatures. The equilibrium data were modeled with the help of Langmuir and Freundlich equations. Overall, the data are well fitted with both the models, with a slight advantage for Langmuir model. The oak bark char's ability to remove Pb(II) and Cd(II) is remarkable when considered in terms of the amount of metal adsorbed per unit surface area (0.5157 mg/m 2 for Pb(II) and 0.213 mg/m 2 for Cd(II) versus that of commercial activated carbon.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.