Abstract
Two akaganeite materials were tested for the removal of antimonate, trimethyl antimonate, arsenate, arsenite, and dimethyl arsenate from water: a commercial product (GEH) and a synthesized akaganeite. The two materials show similar qmax values, but differ in their KL values. This could be a result of their different crystal sizes indicated by sharper XRD reflections of the synthesized akaganeite compared with GEH. Batch experiments were carried out using all species to investigate the influence of the pH on their sorption onto the commercial material. The best results for the removal of antimonate and arsenate were achieved under acidic conditions, while the sorption of arsenite has an optimum at pH 7. The maximum loadings vary from 450mgg−1 (antimonate at pH 2.2.) to 2mgg−1 (trimethyl antimonate at pH 7). Competition reactions (up to a 10-fold excess of the competitor ion) were studied with antimonate, arsenate, and phosphate. The sorption capacity of arsenate decreases up to 12.5% by adding phosphate (ratio 1:10), but the addition of antimonate did not influence the sorption of arsenate. Conversely, the sorption of antimonate decreases due to the addition of 10-fold concentration of arsenate (31%) or phosphate (27%).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.