Sorption capacity of Eichhornia crassipes (Mart.) Solms for zinc removal from electroplating industry wastewater.

Abstract

Various industrial operations in the dye, fertilizer, pesticide, battery, mining, and chemical industries have been associated with releasing heavy metals in wastewater, such as lead, zinc, copper, arsenic, cadmium, chromium, nickel, and mercury. These metals are dangerous to aquatic life as well as to humans, who may consume them directly or indirectly. Therefore, before being released into open water and land resources, it is necessary to minimize the concentration of toxic ions below the discharge limit. This study used Eichhornia crassipes (Mart.) Solms to remove zinc from wastewater from the electroplating industry in a constructed wetland. Experimental investigations were conducted for removing zinc ions from electroplating industry wastewater using various process parameters such as nutrient dosages, dilution ratios, potential of hydrogen ions, biomasses, and contact times. The outcome of this study revealed that the maximum zinc removal percentage in electroplating industrial wastewater was found for the optimum nutrient dosages of 60g, dilution ratios of 10, potential hydrogen ion levels of 8, and biomass amounts of 100g. The maximum zinc removal by Eichhornia crassipes (Mart.) Solms was found to be 88.3 ± 0.6 and 93.4 ± 0.4% at the optimum parameter values for the electroplating industry wastewater and the aqueous solution, respectively, against the optimum contact time of 22days. This study suggests using this phytoremediation technology to remove all pollutants from industrial wastewater in general, not just wastewater from the electroplating industry.