Sorption and desorption of lindane by wood charcoal in fixed‐bed reactor

Abstract

Sorption and desorption of lindane (y‐HCH) by wood charcoal (WC) and wood charcoal treated by 1N HNO3 (WCT) in fixed‐bed reactor (FBR) were investigated in this study. WCT revealed a better performance than WC, in removing lindane in FBR. The breakthrough of lindane was significantly affected by the size of WCT, flow rate to the FBR, and depth of WCT bed. The removal of lindane in the presence of mixture of other pesticides was considerably reduced. The design parameters for FBR were calculated based on the bed‐depth service time (BDST) approach. Many parameters Viz. depth of sorption zone, velocity of sorption, sorbent use rate, critical bed‐depth, bed efficiency, and service time, were determined for design of the fixed‐bed. Using the material balance principle, the characteristics of the wave‐front were evaluated and found that the wave‐front velocity is approximately equal to the sorption velocity determined from the BDST approach. Desorption studies were performed in dilute organic solvent media and they gave an excellent performance in regeneration process.