Abstract
Soot concentration measurements were performed using diode-laser extinction in an atmospheric air-blown entrained flow gasifier at two vertical levels. The gasifier was operated at different air-fuel equivalence ratios and with variations in fuel and burner configurations. Two fuels were investigated: wood powder and peat powder. These were burned using two burner configurations, one giving a rotating flow inside the gasifier (swirl), and one where the fuel and air were injected parallel with the gasifier axis (jet). The diode-laser measurements were performed at the wavelength 808 nm from which the soot concentrations were estimated, and additionally at 450 nm in order to gain insight into the spectral dependence of the extinction to estimate measurement quality. Additional diagnostic techniques were used, such as an electrical low-pressure impactor (ELPI) for soot size distributions and gas chromatography for species concentration measurements. The results show that wood powder produces higher soot concentrations than peat powder, especially at lower air-fuel equivalence ratios. Furthermore, the burner configuration had in general much less impact than the choice of fuel on the soot concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
