Sono assisted electrocoagulation process for the removal of pollutant from pulp and paper industry effluent.

Abstract

In the present work, the efficiency of the sonication, electrocoagulation, and sono-electrocoagulation process for removal of pollutants from the industrial effluent of the pulp and paper industry was compared. The experimental results showed that the sono-electrocoagulation process yielded higher pollutant removal percentage compared to the sonication and electrocoagulation process alone. The effect of the operating parameters in the sono-electrocoagulation process such as electrolyte concentration (1-5g/L), current density (1-5A/dm2), effluent pH (3-11), COD concentration (1500-6000mg/L), inter-electrode distance (1-3cm), and electrode combination (Fe and Al) on the color removal, COD removal, and power consumption were studied. The maximum color and COD removal percentages of 100 and 95%, respectively, were obtained at the current density of 4A/dm2, electrolyte concentration of 4g/L, effluent pH of 7, COD concentration of 3000mg/L, electrode combination of Fe/Fe, inter-electrode distance of 1cm, and reaction time of 4h, respectively. The color and COD removal percentages were analyzed by using an UV/Vis spectrophotometer and closed reflux method. The results showed that the sono-electrocoagulation process could be used as an efficient and environmental friendly technique for complete pollutant removal.