Abstract
The paper discusses the basic issues of the local approach to ductile fracture of structural metals, with particular emphasis on the failure due to microvoid development. The mechanisms of nucleation of voids around inclusions and precipitates are characterized. The criteria for the nucleation of voids resulting from cracking of the existing particles or their separation from the material matrix are presented. Selected results of experimental studies and Finite Element Method (FEM) simulations on nucleation of voids are discussed. The analytical and numerical models of growth and coalescence of voids are described, indicating the effect of the stress state components on the morphology of voids and the course of the cracking on a microscopic scale.
Highlights
Many engineering structures in use have reached or exceeded their design service life
The results presented in the literature provide conflicting evidence on this point
Due to the practical importance, the issues of microstructural phenomena occurring during ductile fracture of metals have been the subject of intensive research in recent years, which allows for a better phenomenon understanding and the development of advanced computational models
Summary
Many engineering structures in use have reached or exceeded their design service life. The development of material technology and computational methods, mainly numerical ones, which have been progressing in recent decades, has revealed a number of limitations of conventional methods. Their most common disadvantage is their low versatility, because each case of the geometry of a structural element and a defect requires an individual approach. These procedures are costly and time-consuming [6]. This paper discusses the basic aspects related to the local approach to the analysis of ductile fracture of metals, taking into account changes in the microstructure of the material, namely the development of voids
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.