Abstract
Experimental data are presented to illustrate the effects of cement type and curing upon the depth of carbonation and reinforcement corrosion in cover concrete after exposure for 18 months at 20°C and 60% relative humidity. Three curing periods (1, 3 and 28-days) and 17 cements, with various proportions of granulated blastfurnace slag or limestone, were used to make concretes, at 0.59 water/cement ratio, with 28 day strengths in the range 26 to 46 MPa. The depth of carbonation after 18 months was 64% greater than after 6 months and was affected more by cement type than by curing. The depth of carbonation increased when Portland cement clinker was replaced by 19% or more of limestone or granulated blastfurnace slag. The depth of carbonation after 18 months correlated better with the air permeability of cover concrete, initial weight loss (an indicator of moisture diffusion rate in cover concrete) or the cube strength 8 days after the end of curing than it did with 28-day cube strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
