Abstract

In spite of the rapid developments in synthesis methodologies in different fields, the traditional methods are still used for the synthesis of organic compounds, and regardless of the type of chemistry, these reactions are typically performed in standardized glassware. The high-throughput chemical synthesis of organic compounds such as fragrant molecules, with more economic benefits, is of interest to investigate and develop a process that is more economical and industrially favorable. In this research, the catalytic activity of Mg-Al catalyst derived from hydrotalcite-like precursors with the Mg/Al molar ratio of 3 was investigated for the solvent-free synthesis of jasminaldehyde via aldol condensation of benzaldehyde and heptanal. The reaction was carried out in a fixed-bed flow reactor, at 1 MPa, and at different temperatures. Both Brønsted and Lewis (O2− anions) base sites, and Lewis acid sites exist on the surface of the Mg-Al catalyst, which can improve the catalytic performance. Increasing the reaction temperature from 100 °C to 140 °C enhanced both heptanal conversion and selectivity to jasminaldehyde. After 78 h of reaction at 140 °C, the selectivity to jasminaldehyde reached 41% at the heptanal conversion 36%. Self-condensation of heptanal also resulted in the formation of 2-n-pentyl-2-n-nonenal. The presence of weak Lewis acid sites creates a positive charge on the carbonyl group of benzaldehyde, and makes it more prone to attack by the carbanion of heptanal. Heptanal, is an aliphatic aldehyde, with higher activity than benzaldehyde. Therefore, the possibility of activated heptanal reacting with other heptanal molecules is higher than its reaction with the positively charged benzaldehyde molecule, especially at a low molar ratio of benzaldehyde to heptanal.

Highlights

  • Jasminaldehyde, which known as α-amylcinnamaldehyde, is a traditional perfumery chemical with a violet scent

  • Solvent-free synthesis of jasminaldehyde via aldol condensation of benzaldehyde with heptanal was investigated in a fixed-bed flow reactor, using the Mg-Al catalyst derived from hydrotalcite-like precursors with the Mg/Al molar ratio of 3

  • A benzaldehyde molecule is adsorbed on the weak acid site via its O atom; the C=O groups of benzaldehyde interact with Lewis acid sites, and the positive charge on that α–C atom increased by the polarization of the C=O group, which make it more likely to a nucleophilic attack by the heptanal carbanion

Read more

Summary

Introduction

Jasminaldehyde, which known as α-amylcinnamaldehyde, is a traditional perfumery chemical with a violet scent. Natural sources are used for the production of less than 5% of perfumery molecules [2]. Owing to the lower price of synthetic materials, their higher stability in acidic, basic, and even oxidizing media, these compounds became more attractive to be used in the synthesis of perfumery chemicals [2]. Jasminaldehyde can be synthesized via the cross aldol condensation of heptanal (C7 H14 O). The self-condensation of heptanal resulted in the formation of 2-n-pentyl-2-n-nonenal (C14 H26 O) as the main by-product of this reaction. A high molar ratio of benzaldehyde to heptanal is required during the reaction to reduce the Catalysts 2020, 10, 1033; doi:10.3390/catal10091033 www.mdpi.com/journal/catalysts

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call