Abstract
Molybdophosphate, formed between orthophosphate and molybdate in sulphuric acid solution, is extracted into a mixture of toluene and 4-methylpentan-2-one (1:3 v v ) with Malachite Green as counter-ion. A single extraction with equal phase volumes gives an apparent molar absorptivity for phosphate of 2.3 × 10 5 l.mole −1.cm −1 at 630 nm; the absorbance of the reagent blank is 0.03. With an organic to aqueous phase-volume ratio of 1:10, the molar absorptivity is 2.5 × 10 5 l.mole −1.cm −1 and the absorbance of the reagent blank 0.08. By the proposed method, ng ml levels of phosphorus can be determined, and the detection limit is about 0.1 ng ml . The standard deviation and relative standard deviation for the determination of phosphorus in tap water (4.3 ng ml ) are 0.05 ng ml and 1.1%, respectively. The method can also be applied to the determination of phosphorus in river water and sea-water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.