Solution-Processed Transparent Nickel-Mesh Counter Electrode with in-Situ Electrodeposited Platinum Nanoparticles for Full-Plastic Bifacial Dye-Sensitized Solar Cells.

Abstract

A new type of embedded metal-mesh transparent electrode (EMTE) with in-situ electrodeposited catalytic platinum nanoparticles (PtNPs) is developed as a high-performance counter electrode (CE) for lightweight flexible bifacial dye-sensitized solar cells (DSSCs). The thick but narrow nickel micromesh fully embedded in a plastic film provides superior electrical conductivity, optical transmittance, and mechanical stability to the novel electrode. PtNPs decorated selectively on the nickel micromesh surface provide catalytic function with minimum material cost and without interfering with optical transparency. Facile and fully solution-processed fabrication of the novel CE is demonstrated with potential for scalable and cost-effective production. Using this PtNP-decorated nickel EMTE as the CE and titanium foil as the photoanode, unifacial flexible DSSCs are fabricated with a power conversion efficiency (PCE) of 6.91%. By replacing the titanium foil with a transparent ITO-PEN photoanode, full-plastic bifacial DSSCs are fabricated and tested, demonstrating a remarkable PCE of 4.87% under rear-side illumination, which approaches 85% of the 5.67% PCE under front-side illumination, among the highest ratio in published results. These promising results reveal the enormous potential of this hybrid transparent CE in scalable production and commercialization of low-cost and efficient flexible DSSCs.