Abstract
We have fabricated the flexible organic light-emitting diode (OLED) displays on 10 μm colorless polyimide (CPI) substrate using polymer light-emitting diode (PLED). The CPI was chosen as a substrate for flexible device because of its high transparency of around 90% at 550 nm and relatively high temperature process of >300°C. All organic materials for OLED were deposited by spin coating technique and the OLED on PI substrate was encapsulated by the polyethylene terephthalate (PET) film with barrier layer. The PLEDs have a driving voltage of 3 V at 1000 cd/m2, and the current efficiency of 11.7 cd/A for the device on CPI substrate at 1000 cd/m2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.