Solute transport in porous media studied by lattice Boltzmann simulations at pore scale and x-ray tomography experiments.

Abstract

With the aid of nondestructive microfocus x-ray computed tomography (CT), we performed three-dimensional (3D) tracer dispersion experiments on randomly unconsolidated packed beds. Plumes of nonreactive sodium iodide solution were point injected into a sodium chloride solvent as a tracer for the evaluation of the dispersion process. The asymptotic dispersion coefficient was obtainable within the experimental scale and was summarized over Péclet numbers from 11.7 to ∼860. Then, the lattice Boltzmann method and moment propagation method were used to elucidate the mechanisms embedded in the dispersion phenomenon. The methods were rigorously verified against the classical Taylor dispersion problem and extended to simulate fluid flow and tracer dispersion in high-resolution 3D digital porous structures from CT. The method of moments, Lagrangian velocity correction function, and dilution index were thoroughly analyzed to evaluate the dispersion behaviors. Numerical simulations revealed ballistic and superdiffusive regimes at the transient times, whereas asymptotic dispersion behaviors appear at longer characteristic times. Besides, the observed transient times unanimously persist over convective length scales of around 12 particles transversely and 16 particles longitudinally. The estimated dispersion coefficients from simulation are in consistence with the experimental result. Furthermore, the simulation also enabled the identification of regimes, including diffusive, power law, and mechanical dispersion. Thus, the proposed experimental and computational schemes are of practical means to study dispersion behaviors by direct pore scale imaging and modeling.