Abstract
Solid state phase equilibria in the ternary NiAlAs diagram were established at 800 °C. The experimental techniques used to elaborate the phase equilibria were X-ray diffraction (XRD), electron probe microanalysis (EPMA) and scanning electron microscopy (SEM). Three ternary phases, which crystallize in hexagonal symmetry and are all structurally derived from the NiAs type, were evidenced in the Ni-rich part of the diagram. Among them, two ternaries labelled as A and D phases, by comparison with the isostructural ternary phases in the NiGaAs diagram, reveal fully disordered structures; in contrast, the ternary B phase shows a hexagonal superlattice ( a√3, 3 c), which denotes an ordered structure. Very limited solid solubilities were measured in the binary constituent NiAl and NiAs compounds, with the exception of NiAs which showed a homogeneity range with an Al-rich limit corresponding to the formula NiAs 0.7Al 0.3. Neither nickel nor ternary phases are in thermodynamic equilibrium with AlAs, in contrast with the binaries NiAl, Ni 2Al 3 and NiAs which are. The bottom part of the experimental diagram differs from the theoretical one deduced from estimated thermodynamic data on NiAl and NiAs binaries using Miedema's model, but is in agreement with interfacial reaction studies which concluded that NiAl and substituted NiAs are the stable phases when Ni thin films are reacted to completion on AlAs. Finally, the influence of the IIIa element (Ga or Al) in the NiIIIaAs system was considered through a comparative study between NiGaAs and NiAlAs diagrams. The pseudoternary Ni(Ga,Al)As system was experimentally estimated for the atomic composition (Ga 0.7Al 0.3), which is the value usually chosen for the elaboration of GaAs (Ga,Al)As heterostructures with Ga 1− x Al x As exhibiting a direct gap of highest energy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.