Abstract
Recycling of metallic solid-waste (SW) components has recently become one of the most attractive topics for scientific research and applications on a global scale. A considerable number of applications are proposed for utilizing metallic SW products in different applications. Utilization of SW magnesium (Mg) metal for tailoring high-hydrogen storage capacity nanoparticles has never been reported as yet. The present study demonstrates the ability to produce pure Mg ingots through a melting and casting approach from Mg-machining chips. The ingots were used as a feedstock material to produce high-quality Mg-ribbons, using a melting/casting and spinning approaches. The ribbons were then subjected to severe plastic deformation through the cold rolling technique. The as-cold roll Mg strips were then snipped into small shots before charging them into reactive ball milling. The milling process was undertaken under high-pressure of pure hydrogen gas (H2), where titanium balls were used as milling media. The final product obtained after 100 h of milling showcased excellent nanocrystalline structure and revealed high hydro/dehydrogenation kinetics at moderate temperature (275 °C). The present study shows that primer cold rolling of Mg-strips before reactive ball milling is a necessary step to prepare ultrafine magnesium hydride (MgH2) nanopowders with advanced absorption/desorption kinetics behavior. These ultrafine powders with their nanocrystalline structure are believed to play an important role in effective gas diffusion process. Moreover, the fine titanium particles came from the ball-powder-ball collisions and introduced to the Mg matrix have not only acted as micro-scaled milling media, but they played a vital catalyzation role for the process.
Highlights
IntroductionWaste is stigmatized as an undesired material, which must be disposed of after its primary use
The sample composited of a mixture of largeand medium-sized grains, with an average grain size of ~480 nm (Figure 3a)
The sample exhibited sharp Bragg peaks corresponding to hcp-Mg (PDF 00-004-0770) without evidence of any Bragg-peaks’ mismatches (Figure 4a)
Summary
Waste is stigmatized as an undesired material, which must be disposed of after its primary use. It was believed that solid waste (SW) management is a difficult and expensive task that requires prolonged time-consuming procedures. Significant strides are achieved in dealing with SW components of various types to overcome concerns with their recycling and recovery procedures [1,2]. Global interest in recycling ferrous and nonferrous metal alloys including magnesium (Mg) metal, has received great attention as of late. This is due to their favorable engineering properties [7,8,9]. Excellent flexibility and abundance as a natural resource, make Mg a desired material, especially when the overall strength of a material is desired [10]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
