Abstract

This paper describes a method for the sensitive, selective, and solvent-free determination of six oxazole fungicide residues (hymexazol, drazoxolon, vinclozolin, chlozolinate, oxadixyl, and famoxadone) in malt beverages. Direct immersion solid-phase microextraction (DI-SPME) coupled to gas chromatography with mass spectrometry in the selected ion monitoring mode, GC-MS(SIM), is used. A comparison of the optimal fiber used, a polar carbowax-divinylbenzene 70-microm fiber, and a nonpolar polydimethylsiloxane 100-microm fiber was carried out. Optimal extraction conditions were 60 degrees C and an extraction time of 30 min under continuous stirring. Desorption was carried out at 250 degrees C for 5 min. Detection limits ranged from 0.006 to 0.3 microg L(-1) at a signal to noise ratio of 3, depending on the compound. The proposed method was successfully applied to malt beverages including malt, beer, and whisky, and none of the samples contained residues higher than detection limits.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call