Abstract
A simple, selective and rapid method for solid phase extraction and spectrophotometric determination of thiocyanate using a manganese (III) tetrakis (p-sulfonatophenyl) porphyrin, [Mn (TPPS) OAC] bound to Amberlite IR-400 has been developed. The influence of pH, amount of solid phase, sample matrix, type and amount of eluting agent and flow rates i.e. variables affecting the efficiency of the extraction system were evaluated and conditions of the sample, eluting solution and active phase were optimized. The maximal capacity was found to be as 1.16 microg mL(-1) for 1200 mL. Thiocyanate ions can be eluted quantitatively with 8 mL 0.3 M ferric chloride. The enrichment factor was 150. The linear range of the determination is between 0.4-2.0 microg mL(-1) for preconcentration method with a limit of detection of 2.8 ng mL(-1). The method has been successfully applied for determination of trace amounts of thiocyanate in tap water, saliva sample and a synthetic mixture.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
