Abstract
The hydrothermal liquefaction (HTL) of Sargassum tenerrimum (ST) macroalgae was carried out for 15 min, over various solid base catalysts (CaO supported on CeO2, Al2O3, and ZrO2) at different reaction temperatures (260–300 °C), different catalyst quantities (5–25 wt%) and using different solvent systems. Maximum bio-oil (BO) yields for the non-catalytic HTL with single solvent water, ethanol, and water-ethanol co-solvent were 3.3 wt%, 23.3 wt%, and 32.0 wt%, respectively, at 280 °C. Ethanol as single solvent elicited highest BO yield of 25.2 wt% with CaO/ZrO2 (10.0 wt%) catalyst. However, the highest BO yield (33.0 wt%) accompanied by higher conversion (70.5%) was obtained with CaO/ZrO2 (10.0 wt%) under water-ethanol co-solvent. The selectively higher percentage of ester functional compounds (87.8%) was found with CaO/ZrO2 catalyst under water-ethanol co-solvent. Also, the bio-oil obtained from catalytic liquefaction showed a higher high heating value (HHV) compared to that from the non-catalytic HTL reaction.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
