Abstract
Lithium borosilicate (LBS) glasses of different modifier to formers ( m/ f) ratios were synthesized through sol–gel process. Structural characterisation of LBS glasses were made using XRD, FTIR and DSC techniques. XRD pattern of LBS samples showed amorphous phase for gels heat treated between 573 and 698 K and further heat treatment above 698 K showed the formation of crystalline multiphases. FTIR spectra for dried LBS gels between 338 and 443 K showed the presence of hydroxyl group on the surface of silicate and borates matrix and on heat treatment, the FTIR spectra revealed the formation of silicate and borate linkages in LBS glassy matrix. DSC curve confirmed the presence of adsorbed water molecules in LBS glassy matrix. Impedance measurements were carried out on LBS samples of different m/ f ratios as a function of temperature and data were analyzed using Boukamp equivalent circuit software. The conductivity of LBS glasses at different temperatures was calculated from analyzed impedance data. Activation energy ( E a) is obtained from Arrhenius plots of the dc conductivity and it is found to be 0.64 (±0.02) eV for high conducting sample. ac conductivity is calculated from impedance data and analyzed using Jonscher's power law (JPL) exponent (s) for m/ f ratios of LBS samples at different temperatures. The power law exponent s of LBS glasses exhibited a non-linear behavior with temperature. The electric modulus data were fitted with Kohlraush–William–Watts (KWW) stretched exponential function and the modulus formalism is used to study the ionic relaxation behavior in LBS samples.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
