Solar thermal applications of graphene-based block-ring resonator solar absorber using TiC–W materials

Abstract

Solar absorbers enable the use of solar energy, a renewable and plentiful resource, minimizing reliance on finite fossil fuels and contributing to sustainable energy practices. The solar absorber that is studied here has an average absorptance of 96.85 % with a simple design and inexpensive materials. This design has two layers of resonator and active layer Block Ring Base Solar Absorber (BRBSA) structure. This study employs tungsten (W) as a resonator and titanium carbide (TiC) as a dielectric layer. The absorption spans from 100 to 3200 nm, with an average absorption exceeding 94 % across the entire structure. Notably, over 97 % of absorption occurs within the range of 210–710 nm, and the highest absorption, reaching 99.9 %, is observed in the wavelength range of 1510–1650 nm. The structure demonstrates high absorption rates across various regions, including 95.85 % in the UV region, 97.89 % in the visible, 95.73 % in the near-infrared, 95.87 % in the mid-infrared, and 89.56 % in the far-infrared region. After analyzing various potential variations of the proposed structure, an optimal design was identified. The parametric study was conducted to determine the optimal physical properties. Additionally, the electric field intensity analysis confirmed the proposed structure's broadband and constant absorption response. This Block Ring Base Solar Absorber has various uses, including solar drying systems, cookers, vaporizers, and warmers.