Abstract

ZnO-pumice composite photocatalyst was synthesized and characterized using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and X-ray fluorescence (XRF). The photocatalyst was then used for the photocatalytic degradation of textile effluent under sunlight irradiation. The process variables affecting the photocatalytic degradation were optimized using central composite design, and the kinetic data obtained at different solution pH (4, 7 and 10) were evaluated using pseudo-first-order approximation of the Langmuir-Hinshelwood model. The optimization results showed that the predicted values of degradation efficiency matched the observed values reasonably well with R2 = 0.9677 and Adj-R2 = 0.9387. At the optimum values of 3.0 g/L catalyst dosage, 4.01 solution pH and 45.04 min irradiation time, the predicted and experimental degradation efficiencies were 93.04 and 90.17%, respectively. The kinetic study revealed that the degradation of dye molecules in the effluent obeyed a pseudo-first-order rate law with reaction rate constants of 0.0597, 0.0558 and 0.0535 min−1 at pH of 4, 7 and 10, respectively.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.