Solar absorption and thermal emission properties of multiwall carbon nanotube/nickel oxide nanocomposite thin films synthesized by sol–gel process

Abstract

Abstract Multiwall carbon nanotubes (MWCNTs)/nickel oxide (NiO) nanocomposites were successfully prepared by a sol–gel process and coated on an aluminium substrate. The MWCNTs were chemically functionalized and then added into NiO alcogels, and magnetic stirred for homogeneous dispersion into the NiO matrix solution. The morphology of the resulting nanocomposite thin films showed that the MWCNTs were embedded in the NiO nano-particle matrix, while HRTEM confirmed that the MWCNTs were surrounded by the NiO nano-particles. Raman spectra for functionalized MWCNTs displayed a red shift from the pristine MWCNTs suggesting successful purification/functionalization. The spectrum for the MWCNTs/NiO nanocomposite indicated the presence of both the TO and LO phonons of NiO, and the D and G bands of the MWCNTs. Red and blue shifts of the NiO phonons and the MWCNT phonons suggested that the vibrational properties of both materials were changed to form new nanocomposite vibrational properties. Despite unoptimized layer thickness and composition, the solar absorptance of the functionalized MWCNTs/NiO nanocomposite films was 0.84 (for a single layer). The thermal emittance at 100 °C was approximately 0.2. These results suggest that MWCNTs/NiO nanocomposite materials are suitable for solar thermal applications.