Abstract
For the upcoming European Space agency (ESA)/Chinese Academy of Sciences (CAS) SMILE mission, launching in 2025, large-format soft X-ray optimised CCDs have been manufactured by Teledyne e2v, named the CCD370. The CCDs are approximately 8 cm × 8 cm and are comprised of 4510 × 4510 18 μm pitch pixels, with a store shield covering approximately 1/7th of the active imaging area to facilitate frame-transfer operation mode. To optimise quantum efficiency within the soft X-ray energy band, the device is 16 μm thick, back illuminated, and has an additional back surface passivation process. The focal plane of the soft X-ray imager (SXI) on the SMILE spacecraft will be comprised of 2 CCD370s, operating with 6 × 6 on-chip binning to mitigate against CTI-induced charge transfer losses and charge spreading throughout the 3-year mission lifetime.As part of the pre-flight testing and calibration, a CCD370 was characterised at the PTB beamline at the BESSY 2 synchrotron in Berlin, and key metrics such as quantum efficiency and energy resolution in the 0.2–1.8 keV energy band were assessed. The quantum efficiency measurements show expected performance within specification for the instrument, and also match a transmission-layer QE model. The energy resolution is 68 ± 2 eV FWHM @ 1.2 keV, which is an improvement over the current generation of X-ray telescopes such as XMM-Newton, Chandra, and the Swift X-ray Telescope. Although competing technologies such as DEPFETs and scientific CMOS image sensors now have similar performance to CCDs, the performance shown here can still easily satisfy requirements for novel X-ray instruments, and can still be useful in future astronomy missions given the rich heritage, high technology-readiness-level, and maturity of the technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.