Abstract
Single phase nanocrystalline soft magnetic Mg 0.7-x Ni 0.3 Zn x Fe 2 O 4, ferrites with x = 0.0 − 0.7 were prepared by sol gel auto-combustion method. X-ray diffraction confirms the formation of single phase nano-crystalline cubic spinel ferrites with average grain diameter ranging between 12.9 nm to 23.9 nm. Formation of the ferrite phase without subsequent heat treatment makes sol-gel auto combustion technique especially suitable and economical for the large scale industrial production of the nano-crystalline ferrites for multilayer chip inductor applications (MLCI). Both, lattice parameter and X-ray density shows a linear increase with increasing Zn 2+ concentration, attributed to the difference in ionic radii and density of Mg and Zn . Increase in Zn content enhances the soft magnetic behavior, exhibiting linear decrease of coercivity from 122.34 Oe to 72.45 Oe, explained by increase of density with Zn addition. The maximum magnetization (Mmax)increases up to 0.106 Tesla (for x = 0.4) and. then decreases with increase of Zn content, discussed on the basis of increase of the occupancy of A-site in spinel ferrite by non-magnetic Zn 2+ ion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Modern Physics: Conference Series
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
