Abstract
The copper ∣ hydrochloric acid interface has been studied in the presence of sodium dodecylsulfate (SDS), benzotriazole (BTAH) and SDS+BTAH mixtures. Polarization curves have shown that SDS exerts little effect as an inhibitor on the anodic dissolution of copper either in the absence or in the presence of BTAH. On the other hand SDS acts as an inhibitor for the H +/H 2 reaction over the entire range of negative overpotentials and promotes significant synergism on the inhibitive action of BTAH. ‘In situ’ Raman spectra show that SDS adsorbs on the copper surface through both moieties, the non-polar aliphatic chain and the polar head. At negative overpotentials SDS promotes the BTAH adsorption on the copper surface. The adsorption equilibrium constant ( K ads) calculated from a Langmuir isotherm model at a constant negative overpotential is about 10 4 dm 3 mol −1, and it depends on the potential. The Langmuir model was applied considering n active sites per SDS molecule, according to the results previously observed in sulfuric medium. K ads increases and n decreases as the potential becomes more positive suggesting a charge effect on the surfactant adsorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.