Sn–Ni3S2 Ultrathin Nanosheets as Efficient Bifunctional Water-Splitting Catalysts with a Large Current Density and Low Overpotential

Abstract

Ni3S2 nanosheets doped with tin (Sn) grown on nickel foam (Sn-Ni3S2/NF) through a facile hydrothermal process were found to be superior water-splitting electrocatalysts. As for overall water splitting (OWS), when the current density is 10 mA cm-2, the required voltage is only 1.46 V. Meanwhile, itexhibits a large current density property and long-time stability (>60 h current-time tests) for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). In order to reach the current densities of 100 and 1000 mA cm-2, Sn-Ni3S2/NF needs overpotentials of 0.17 and 0.57 V for HER, and 0.27 and 0.58 V for OER, respectively. The water-splitting property of Sn-Ni3S2/NF is much better than that of pure Ni3S2/NF or even 20 wt % Pt/C/NF and RuO2/NF. Furthermore, Sn-Ni3S2/NF showed a higher turnover frequency at different potentials, with ∼100% Faraday efficiency for both O2 and H2. The improved activity of Sn-Ni3S2/NF activity for water-splitting is attributed to the doping of Sn, which enhanced the intrinsic activity of Sn-Ni3S2/NF for OWS. This article not only provides a new efficient and stable catalyst for OWS, but also proposes an interface design principle for NF-based high-performance water-splitting materials.