Abstract
One lead free solder candidate, Sn-Ag-Cu305 (Sn96.5/Ag3.0/Cu0.5), has come into widespread use as a replacement for traditional tin-lead solder (Sn63/Pb37). However, the price of silver has increased dramatically in recent years. This has increased manufacturing costs, impacting firm competitiveness. This paper evaluates the performance of the low cost Sn-Cu-Ni solder alloy used for wave soldering. Sample products for several applications are used to assess critical factors in the wave soldering process. A principal component analysis was performed in this paper to integrate multiple quality characteristics, namely assembly yield and solder joint strength, for process development. As a result, a parameter combination of 270 soldering temperature and 8 s dwell time is recommended. A test vehicle with daisy-chain circuitry design is used to investigate the performance of samples prepared by the optimal process. Samples are subject to the thermal cycling test. The performance of the recommended process is therefore verified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Components, Packaging and Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
