Abstract
This study investigates ipterfacial reaction and joint strength of Sn-Ag and Sn-Ag-Cu solder balls bonded to electroless Ni-P plating with various thicknesses of Au coating (50, 250 and 500 nm). For the Sn-Ag solder joints, a P-rich layer formed after reflow-soldering at the joint interface, regardless of thickness of the Au coating. However, for the Sn-Ag-Cu solder joints, a P-rich layer formed at the joint interface only in those samples with Au coating of 250 and 500 nm. Fractures were found to occur at the interface, and the jbint strength degraded at Au thickness of > 250 nm for both the Sn-Ag and Sn-Ag-Cu solder joints. An Au thickness of 50 nm resulted in the best joint strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
