SMC Development Guidelines for Axial Flux PM Machines Employing Coreless Rotor Structure for Enhancing Efficiency Based on Experimental Results

Abstract

In recent years, there has been growing demand for flat electrical machines in order to minimize system size while also maintaining high efficiency. In general, axial flux machines (AFMs) are more suitable for flat form than radial flux machines (RFMs). AFMs usually employ a soft magnetic composite (SMC) for the stator core, and their efficiency can be improved by employing an SMC that has low iron loss. However, this reduces the average torque because there is generally a tradeoff relationship between iron loss and magnetic permeability in SMCs. This article, therefore, proposes an AFM with a coreless rotor structure in which the torque performance is not easily affected by the permeability of the SMC. This article aims to reveal the ideal SMC characteristics for high efficiency in AFMs. First, many virtual SMC materials with different iron loss and permeability are used for simulations of AFMs in order to investigate sensitivity to material properties. The simulations by virtual SMCs take into account the experimental increase in the iron loss. As a result, guidelines for developing SMCs are constructed based on the experimental results. Finally, prototype AFMs employing new SMCs developed by following the guidelines are shown, and it is found that they offer higher efficiency in all operating area than conventional AFMs. In particular, one prototype achieves an extremely high efficiency of over 96% at 6000 r/min, 0.8 Nm in experiments.