Small-angle X-ray scattering study of modified porous suspension-poly(vinyl chloride) particles

Abstract

Small-angle X-ray scattering (SAXS) was ap- plied to investigate the microstructure of unmodified and modified porous commercial suspension-type poly(vinyl chloride) (PVC) particles. The modified PVC particles were prepared by an in situ stabilizer-free polymerization/ crosslinking of particles absorbed with a monomer/ crosslinker/peroxide solution. The modifying polymers in- clude styrene with or without divinyl benzene (DVB) as a crosslinker and methyl methacrylate (MMA) with or with- out ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The SAXS method was used to highlight the effect of polystyrene (PS) on the microstructure of PVC particles and to evaluate the characteristic lengths, both in the PVC/PS and the PVC/XPS (PS crosslinked with 0 and 5% DVB, respectively) systems. A model is suggested, where during the synthesis modification process, swelling of PVC by styrene and styrene polymerization occur simulta- neously. PVC swelling by styrene causes destruction of the PVC subprimary particles, whereas styrene polymerization leads to phase separation resulting from incompatibility of the polymers. It was further suggested that because of PVC swelling by styrene, structure of the subprimary particles is lost. Therefore the characteristic lengths of PVC/PS and PVC/XPS, as calculated from the SAXS measurements, were attributed to the size of the phase-separated PS and XPS inclusions, respectively. The SAXS method also shows that PMMA and XPMMA do not influence the PVC microstruc- ture. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1024 -1031, 2005