Abstract
ABSTRACTSludge Reed beds have been used for dewatering (draining and evapotranspiration) and mineralisation of sludge in Denmark since 1988 when the first sludge processing system was introduced. Sludge from wastewater treatment plants (2,500‐125,000 pe) is treated in sludge reed bed systems with 1–18 basins with loading rates of 25–2,200 tonnes dry solids/year for ten years. In 2002, approximately 95 systems were in operation. Dimensioning and design of reed bed systems depends on the sludge production rate, sludge type, quality and regional climate.The maximum sludge loading rate is approximately 50–60 kg DS/m2/year. Loading cycles are related to the sludge type and the age of the sludge reed systems. The sludge residue will, after approximately ten years of operation, reach an approximate height of 1.2–1.5 metres with dry solids content of 30–40%. Experience has shown that the quality of the final product with respect to heavy metals, hazardous organic compounds and pathogen removal after ten years of treatment make it possible to recycle the biosolids to agriculture as an enhanced treated product.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
