Abstract

Activated sludge processes with an ultra-short sludge retention time (ultra-short-SRT) are considered to have potential for energy and resource recovery from wastewater. The present study focused on the sludge characteristics, system performance and microbial kinetics in ultra-short-SRT activated sludge (USSAS) processes using typical domestic wastewater (SRT = 0.5, 1, 2, 3 and 4 d). The results showed that compared with the sludge in conventional activated sludge (CAS) processes, the sludge structure in USSAS system was looser (fractal dimension, D2P, 1.19–1.33), the boundary was rougher (pore boundary fractal dimension, DB, 1.44–1.59), the sludge concentration was lower, and the sludge volume index (SVI) was higher; bacteria such as Thiothrix and Trichococcus that cause sludge bulking, which poses an operation risk, were extensively detected, especially at SRTs of 0.5 d and 1.0 d. The performance in terms of total chemical oxygen demand (tCOD) and phosphorus removal increased with increasing SRT, and the highest removal rate (approximately 85% for tCOD and 90% for phosphorus) was observed when the SRT was 4 d. Both bioconversion and biosorption were responsible for the C/P separation, and their roles were different for different types of organic matter and phosphorus under different SRT conditions. The proportion of phosphate-accumulating organisms (PAO) reached 2.4% when the SRT was 3 d, resulting in highly effective biological phosphorus removal. The values of microbial kinetic parameters such as YH and KdH in USSAS systems were higher than those in CAS systems, indicating faster microbial community renewal. This study was helpful for understanding the characteristics of USSAS process.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.