Abstract

ABSTRACT In this study, slow pyrolysis of eight biomass feedstocks was examined at 350°C for 60 min. The effects of the biomass effective hydrogen-to-carbon atomic ratio (H/Ceff) and reaction atmosphere (N2, H2, CO2, and CH4) on the product yields and properties of the pyrolysis oil were studied. Basically, biomass with a higher H/Ceff ratio produced a higher pyrolysis oil yield and a lower solid yield, which varied between 4.66 and 45.57 wt.% and 22.10 and 54.17 wt.%, respectively. The pyrolysis oil yield is proportional to the protein+lipid content, while the solid yield is proportional to the cellulose +hemicellulose lignin content of the biomass feedstock. Lignin is the most difficult component of the biomass feedstock to convert. The effect of the reaction atmosphere on the pyrolysis product distribution depends on the biomass H/Ceff. The pyrolysis oil+gas yield decreased in the order H2> N2> CO2> CH4 with biomass H/Ceff ≤ 0.61, CH4> H2> CO2> N2 with biomass H/Ceff between 0.61 and 0.96, and N2> CO2> H2> CH4 with biomass H/Ceff ≥0.97. The gaseous products mainly consisted of CO2, CH4, CO, H2, C2H6, and C3H8, and CO2 always had the highest yield. All the pyrolysis oils had higher C and H content and lower O and S content compared with that of the biomass feedstock, and biomass with a higher H/Ceff ratio produced a pyrolysis oil with a higher H/Ceff ratio. Furthermore, biomass with a higher H/Ceff ratio produced a pyrolysis oil with a higher saturated hydrocarbon content, while biomass with a lower H/Ceff ratio produced a pyrolysis oil with a higher content of ketones and phenolic compounds.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call