Abstract
This paper presents numerical and laboratory experiments to investigate slope failure characteristics and commonly used slope stabilization methods. Using an improved distinct element method, the interparticle adhesive force is incorporated with a modified numerical model to account for the effect of suction. The model is validated through laboratory tilting box tests. Calculated slope failure angles are consistent with experimental observations. Different patterns of slip surface are also identified. Furthermore, the modified numerical model quantifies the micromechanical characteristics of the interparticle network and their evolutions during shear deformation. The calculations show that the maximum ratio of shear stress to normal stress takes place when the contact plane coincides with the mobilized plane, whereas the minimum value occurs when it is parallel to the directions of principal stresses. On this basis, we propose the optimal installation angle of soil nails along the minor principal stress (σ3) direction. The effectiveness of this approach is evaluated through tilting box tests. Two commonly used slope surface stabilization methods are also experimentally investigated.Key words: distinct element method, tilting box test, slip surface, optimal installation angle of soil nails.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
