Abstract
Noise generated by high-lift devices such as slats on a wing is a major contributor to the overall airframe noise during the landing approach of a commercial aircraft. In this work the concept of attenuating slat noise using absorptive acoustic liners in the slat gap is explored using a time-domain computational aeroacoustic (CAA) scheme. The aim of the computational modeling is to demonstrate the feasibility of controlling slat noise using acoustic liners, and to optimize the design for a future experiment. A model scale threeelement high-lift airfoil is modeled; the slat and flap deflection angles are 23 deg and 32 deg respectively and the slat has a blunt trailing edge. The freestream Mach number is 0.2 and the main element angle of attack is 5 deg, corresponding to a typical approach condition. Reynolds number is 3.6 million, based on the airfoil chord with the high-lift devices retracted. The computational results are divided into three parts: (1) an unsteady Reynolds-Averaged Navier-Stokes (URANS) simulation using high-order spatial and temporal schemes is conducted for a wing without acoustic liners; the computed flow shows the presence of vortex shedding and acoustic source behind the slat trailing edge; (2) an exercise is conducted on a range of liner impedance values by solving the linearised Euler equations (LEE) for a modelled acoustic source located at the trailing edge of the slat; (3) URANS computations for the wing with liner treatment are conducted. The results show that acoustic liners on the slat cove and on the main element can provide useful attenuation of slat trailing edge noise.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.